C1397 Brake Fault Code
C1397 brake fault code is a code that shows up on the dashboard of a car. It is usually displayed by the car's computer system to alert the driver about a problem with the braking system.
OBD-2 Protocol Meaning: Drive Switch Input Circuit.
The brake fluid is essential for the car's braking system and if it is low, the brakes will not work properly you should also make sure that your brake fluid is at a safe level before driving so that it does not boil over from overheating due to prolonged braking a brake fluid failure can lead to a car engine problem when there is no brake fluid left in the system. A fault with these parts can cause a car to suddenly stop even if it is traveling at a low speed.
Car engines are complex and there are many different things that can cause the brake pedal to pulsate the most common reason for this type of problem is that the brake pads need to be changed because they have worn down too much and no longer provide enough friction against the rotors when you press on the brakes. The first thing to know is that there are many causes of the problem.
C1397 Brake Fault Diagnosis :
The problem with brakes is that they are not always easy to diagnose brakes are one of the most important parts of a car when you push on the brake pedal, it forces fluid through this mechanism which then applies pressure to each wheel and causes them to slow down or stop completely.Car brake system faults are the most common reasons for a car to not stop properly this article will help you identify and fix your German car's brake system faults. You'll need to get an OBD code reader and use it to read the codes stored in your car's computer.