C1188 Brake Fault Code

C1188 brake fault code is a code that shows up on the dashboard of a car. It is usually displayed by the car's computer system to alert the driver about a problem with the braking system.

Meaning:

OBD-2 Protocol Meaning: Brake Fluid Level Sensor Input Short Circuit To Battery.

This section will be about how to avoid dragging brakes when driving your vehicle dirty or worn brake pads: when the pads wear down, they can create an uneven surface which will make the brake pedal pulsate a fault with these parts can cause a car to suddenly stop even if it is traveling at a low speed. Brake pads can wear out and become too thin, which will cause them to make more noise than usual or even wear down completely.

They are what stops your car when you step on the brake pedal when they get worn out, it can cause noise when you apply pressure on the brake pedal and can also make braking more difficult. The brake fluid is essential for the car's braking system and if it is low, the brakes will not work properly.

C1188 Brake Fault Diagnosis :

The first thing you should do is check the brakes for any visible signs of wear, such as cracks in the rotors or pad material coming off of the rotor if you don't see any visible signs of wear, then you'll want to move on and check the calipers for a clog in the lines or a loose hose clamp that could be causing air bubbles in your system many people don't know how to diagnose their car's brake problems, but it's not hard if you know what to look for. Then it moves to an inspection for audible evidence such as squealing or grinding noises.There are many different reasons that the brakes can shake or shudder.