C1114 Brake Fault Code

C1114 brake fault code is a code that shows up on the dashboard of a car. It is usually displayed by the car's computer system to alert the driver about a problem with the braking system.

Meaning:

OBD-2 Protocol Meaning: ABS Power Relay Output Short Circuit To Ground.

Steering wheel vibration is a failure in car dirty or worn brake pads: when the pads wear down, they can create an uneven surface which will make the brake pedal pulsate the most common causes of this problems. One of the most important systems in a vehicle is the braking system.

The SOFT PEDAL error is a fault in the car's braking system this means that if you are driving and need to stop, you will not be able to do so. The brake rotors may also need to be replaced if they have worn out too much or if they are warped or damaged in any way.

C1114 Brake Fault Diagnosis :

The process starts with an inspection for visible evidence such as leaks or loose parts the problem with brakes is that they are not always easy to diagnose if the brakes are not working properly, it can be dangerous to drive.The brake pedal is connected to a mechanism called the master cylinder which regulates brake fluid pressure to all four wheels.German car brake problems check brake troubleshooting is a process of identifying the problem and fixing it.