C0971 Brake Fault Code

C0971 brake fault code is a code that shows up on the dashboard of a car. It is usually displayed by the car's computer system to alert the driver about a problem with the braking system.

Meaning:

OBD-2 Protocol Meaning: Memory Set Switch Circuit Short To Battery.

It can be caused by a faulty brake booster, leaky brake fluid, or faulty master cylinder you should also make sure that your brake fluid is at a safe level before driving so that it does not boil over from overheating due to prolonged braking if they are worn out, you may need to replace them.Dirty or worn brake pads: When the pads wear down, they can create an uneven surface which will make the brake pedal pulsate.

Brake rubbing is a common car engine problem, and it can be caused by a faulty brake pad or uneven brake wear brake fluid leak: brake fluid leaks often result in brake pedal pulsation.While there are many reasons why a car might be making a noise, brake squealing is the most common.

C0971 Brake Fault Diagnosis :

If you don't see any visible signs of wear, then you'll want to move on and check the calipers for a clog in the lines or a loose hose clamp that could be causing air bubbles in your system when you push on the brake pedal, it forces fluid through this mechanism which then applies pressure to each wheel and causes them to slow down or stop completely .Many people don't know how to diagnose their car's brake problems, but it's not hard if you know what to look for. Then it moves to an inspection for audible evidence such as squealing or grinding noises.