C0421 Brake Fault Code

C0421 brake fault code is a code that shows up on the dashboard of a car. It is usually displayed by the car's computer system to alert the driver about a problem with the braking system.

Meaning:

OBD-2 Protocol Meaning: Wiper Rear Disable Switch Circuit Short To Ground.

It can be due to many reasons like lack of maintenance, wear and tear, or faulty parts the most common causes of this problems if you have the brake pedal pulsating when you are braking, it could be a sign of brake fluid leakage. A fault with these parts can cause a car to suddenly stop even if it is traveling at a low speed.

When you press on the brakes, they should make a squeaking sound the brake rotors may also need to be replaced if they have worn out too much or if they are warped or damaged in any way. One of the most important systems in a vehicle is the braking system.

C0421 Brake Fault Diagnosis :

If the brakes are not working properly, it can be dangerous to drive when you push on the brake pedal, it forces fluid through this mechanism which then applies pressure to each wheel and causes them to slow down or stop completely it is responsible for slowing down and stopping the vehicle.The brake pedal is connected to a mechanism called the master cylinder which regulates brake fluid pressure to all four wheels.Many people don't know how to diagnose their car's brake problems, but it's not hard if you know what to look for.